Banner

Banner

Music Brings Life To Emptiness

Friday 9 October 2015

Guide on How To Build Your Own Desktop PC (Part 1 - System test)

Hi everyone, today I'm gonna show you how to build your very own desktop PC. First things first, I'll list out the specs for the PC i'm building today.


Processor - Intel Core 2 Duo 3.0Ghz 
Motherboard - ECS G41MT LGA 775
RAM/Memory - JRam 4GB DDR3 1333MHz
ODD - LG M Disc Optical Drive
HDD - Samsung 500GB 5400rpm Drive
PSU - E Super Power 450W ATX
Cooling - Intel Stock Heat sink (LGA775)

Alright, now that we have listed the technical specifications of our CPU it's time to build it. Before assembling it into the case, I suggest that you test it externally first. the motherboard box can be used as a handy dandy test bench.


First, open the retention clip of the processor socket, then gently insert the processor into the socket. On the processor, there's a small yellow triangle on the corner. Match it with the corresponding one on the socket and place the processor. After that's done, place the retention clip back in it's place.

Next, is to install the heat sink. No thermal paste is needed here for the stock heat sink has been pre-applied with thermal paste. Align the feet with the holes around the processor socket and then press the clips side by side to prevent uneven pressure on the processor. Then connect the fan connector to the 4-pin CPU on the motherboard.




Now to install the RAM/Memory module. Note that if you're using only a single stick, place it to the slot closest to the processor. Make sure when inserting, the notch on the RAM matches with the one on the socket. Gently press on the socket until the clips snap back into place.


After that's done, it's time to power up this baby. Hook it up to the PSU (Power Supply Unit) and plug in the 24-pin ATX power and the 4/8-pin CPU power.



Here's the part where you can learn a handy trick to turn on a PC without the power switch. There's a front panel connector port below the board. Using a key or any metal object, short the two pins that correspond to the PWR BTN label and see the magic. Oh~ and don't forget too hook it up to a monitor before you do.


As you can see our system has successfully able to POST (Power On Self Test). We can conclude that all the parts are fully functional and can proceed to assembling it next. I will continue this post in part 2 as it'll be extremely long if I did it in a single thread. This was supposed to be made into a video but my camera mic broke so yeah.....I hope you enjoyed this guide and found it useful to you. Stay tuned for part 2. Thanks for reading. Oh~ I'll also include how to install windows as well in
part 3






Saturday 14 February 2015

Improvise, Redo and Post Again

4/2168 Jalan Bukit Setongkol
25200 Kuantan Pahang

29 January 2015
Human Resource Manager
Bright Prospect Sdn. Bhd.
Jalan Wong Ah Fook, Bandar Johor Bahru,
80000, Johor Bahru, Malaysia

Dear Sir/Madam,

APPLICATION FOR THE POST OF AN IT SERVICE TECHNICIAN

I am writing this letter in response to your advertisement of an opening in IT Service Technician division that was published in Jobstreet.my. I believe that this position is complies with my interest and my skill sets. I intend to apply as Service Technician in your company.

I am currently completing my training in Computer Engineering (Networking) Certificate at Institut Kemahiran MARA, Lumut. I am a very dedicated worker and a fast learner. I also have experience in troubleshooting hardware and software problems in real time situations during my training. Therefore, given the opportunity and proper guidance, I am positive that I will be able to contribute towards the success of your company.

Enclosed are my resume and certificates that include my qualifications and experience for your perusal. I greatly appreciate the opportunity to further discuss my interest in your company and meet you in an interview. I can be contacted trough my email at hassan9428@gmail.com or hand phone number 013-7125969. Thank you for your prompt action and consideration in this matter.



Yours faithfully,

Hassan Husni


HASSAN HUSNI BIN AMIR HUSNI

Saturday 24 January 2015

Using Collected Information To The Test

4/2168 Jalan Bukit Setongkol
25200 Kuantan Pahang

29 January 2015

Human Resource Manager
Bright Prospect Sdn. Bhd.
Jalan Wong Ah Fook, Bandar Johor Bahru,
80000, Johor Bahru, Malaysia

Dear Sir/Madam,

Application For the Post of an IT Service Technician

I am writing this letter in response to your advertisement of an opening in IT Service Technician division that published in Jobstreet.my. I believe that this position is suitable to my interest and my skill sets. I intend to apply as Service Technician in your company.

I am currently completing my training in Computer Engineering (Networking) Certificate at Institut Kemahiran MARA, Lumut. I am a very dedicated worker and a fast learner. I have also experience in troubleshooting hardware and software problems during my training in real time situations. Therefore, given the opportunity and proper guidance, I am positive that i will be able to contribute towards the success of your company.

Enclosed are my resume and certificates that include my qualifications and experience for your review. I would appreciate the opportunity to further discuss my interest in your company and meet you in an interview.




Yours faithfully,

Hassan Husni


HASSAN HUSNI BIN AMIR HUSNI

Collecting Information Before Starting Your Career

Writers Address: 
4/2168 Jalan Bukit Setongkol, 25200, Kuantan, Pahang

Date: 
24 January 2015

Receivers Address: 
Human Resource Manager Bright Prospect Sdn. Bhd. Jalan Wong Ah Fook, Bandar Johor Bahru, 80000, Johor Bahru, Malaysia 

Salutation: Dear Sir/Madam

Subject Line: Application For the Post of an IT Service Technician

Opening Line:
I am writing this letter in response to your advertisement of an opening in IT Service Technician division that published in Jobstreet.my. I believe that this position is suitable to my interest and my skill sets. I intend to apply as Service Technician in your company.

Content:
I am currently completing my training in Computer Engineering (Networking) Certificate at Institut Kemahiran MARA, Lumut. I am a very dedicated worker and a fast learner. I have also experience in troubleshooting hardware and software problems during my training in real time situations. Therefore, given the opportunity and proper guidance, I am positive that i will be able to contribute towards the success of your company.

Closing:
Enclosed are my resume and certificates that include my qualifications and experience for your review. I would appreciate the opportunity to further discuss my interest in your company and meet you in an interview.

Complimentary Closure:
Yours faithfully

Signature Block:
HASSAN HUSNI BIN AMIR HUSNI

Sunday 18 January 2015

Job Hunting Put To Action


Job/Position : 
  • IT Service Technician
Duties/Responsibilities :
  • Carry out maintenance of office equipments (Printer/Scanner/Networking) or camera. 
  • Troubleshoot all technical issues.
  • Willing to travel.
  • Perform miscellaneous related job as and when assigned by Service Engineer.
Qualification/Requirements :
  • Must Posses at least a Professional Certificate, Diploma, Bachelor's Degree in Engineering (Computer/Telecommunication/Electrical/Electronic/Mechanical/Marine) or equivalent.
  • Required Language(s) : Bahasa Malaysia, Chinese, English.
  • At least 2 year(s) of working experience is required for Engineer position
  • Applicants must be willing to work in Senai, Taman Molek, Tampoi or Batu Pahat

Compensation/Benefits : 
  • -Not Available-

The Company's Address :
  • Jalan Wong Ah Fook, Bandar Johor Bahru, 80000 Johor Bahru, Malaysia.


How To Apply :
  • Walk in interview/E-Mail Application.

Sunday 11 January 2015

Right Careers For The Right Set Of Skills

Computer Technicians install, repair, maintain and analyze many different types of computer equipment, ranging from desktops, servers even systems than monitor changes in our earths atmosphere. the exact duty varies according to the person's training and experience. some specialize in network and servers while others working ares related to forensics and user support.

As for me, i have chosen Repair Technician as my career. What do we do? Repair technicians are usually trained in the general hardware structure of a computer,common problems with it and how to fix it. We must also be able to work with commonly used software and know how to fix incorrect settings and bugs in the software. Most repair technicians inspect computers and peripherals like printers to diagnose problems, ranging from broken parts to incorrect software settings.Why do i choose this career? I personally find it interesting to solve problems related to computers. It tests my capabilities and as a person who likes to takeup challenges, this is one i couldn't resist.